Paint
Paint is common in hit-and-runs and burglaries. It has four main components:
| Component | Job | Examples |
|---|---|---|
| Pigment | Colour and opacity | Titanium dioxide, iron oxides |
| Binder (resin) | Holds the pigment and forms the film | Alkyd, acrylic, epoxy, polyurethane |
| Solvent | Makes the paint flow, then evaporates | Water, toluene, xylene |
| Additives | Special properties | Driers, UV stabilisers |
Car paint is especially useful because it has several layers (primer, base coat, colour coat, clear coat). The sequence of layers can be highly characteristic, and an exact physical fit of a chip to damaged paintwork is very strong evidence.
Collecting paint: pick chips up with tweezers into paper folds or vials, scrape smears with a clean scalpel, and always take a control sample from an undamaged area next to the damage.
Examining paint: a stereo microscope shows colour and layer order; FTIR identifies the binder; pyrolysis-GC/MS breaks the binder down by heat and identifies the fragments; SEM-EDX and XRF give the elements in the pigments; microspectrophotometry (MSP) compares colours too similar to tell apart by eye; Raman spectroscopy identifies pigments. Databases such as the RCMP's PDQ (Paint Data Query) can suggest a vehicle's make, model and year from its paint layers.
Soil
Soil is a mixture of minerals, organic matter, water, air and living things. It sticks to shoes, tyres, tools and clothing, and its composition changes from place to place, so it can link people and objects to locations.
Collecting soil: take control samples from several points at the scene (for example around and under the body or vehicle) and from alibi locations; take questioned samples from shoes, clothes or tyres; keep layers separate; and air-dry moist soil before packaging, so mould doesn't change it.
| Examination | What it shows |
|---|---|
| Colour (often with a Munsell chart, on dried soil) | First, quick comparison |
| Texture and particle size (sieving) | Proportions of sand, silt and clay |
| Microscopy, including polarised light | Minerals, plant fragments, glass or paint particles |
| Density gradient tube | How particles of different density separate |
| pH, organic content | Chemical character of the location |
| XRD, SEM-EDX, ICP-MS, FTIR | Minerals and trace elements |
| Pollen, diatoms, microbial DNA | Biological "fingerprints" of the place |
Fibres
A fibre is the smallest unit of a textile. Fibres transfer easily during contact, so they can show that people, clothing, vehicles and places were in contact.
| Group | Sub-group | Examples |
|---|---|---|
| Natural | Plant (cellulose) | Cotton, flax (linen), jute |
| Animal (protein) | Wool, silk | |
| Mineral | Asbestos | |
| Man-made | Regenerated (from cellulose) | Rayon (viscose), acetate |
| Synthetic (from petrochemicals) | Nylon, polyester, acrylic |
Transfer can be primary (directly from a jumper to a victim) or secondary (from a jumper to a car seat, then to a victim). How many fibres transfer and how long they stay depends on the fabrics, the contact, and what happens afterwards, such as washing.
Collecting fibres: tape lifts from surfaces and clothing, tweezers for visible fibres, or package the whole garment.
Examining fibres:
- Microscopy: colour, diameter, cross-section shape and surface. Cotton is a flattened, twisted ribbon; wool has scales; synthetic fibres are smooth and uniform, sometimes with engineered cross-sections such as trilobal.
- Polarised light microscopy: optical properties such as birefringence.
- FTIR: the best general method to identify the polymer (nylon, polyester, acrylic…).
- Microspectrophotometry: compares dye colour objectively and non-destructively.
- TLC or HPLC: separates the dyes extracted from a fibre (this uses up the sample).
- Solubility tests: for example, nylon dissolves in formic acid.
Pause and answer
- Why is a control sample taken from undamaged paint next to the damage?
- What is secondary fibre transfer?
