Fire and arson
Fire is a rapid oxidation of a fuel that releases heat and light. It needs three things at once: heat, fuel and oxygen.
Interactive diagram
The fire triangle
A fire needs heat, fuel and oxygen at the same time. Remove any one and it goes out. Select a side to learn about it, and use “Remove” to see what happens.
All three present: the fire burns.
- What it is
- Energy that raises the fuel to its ignition temperature: a flame, spark, hot surface or friction.
- How firefighters remove it
- Cooling with water removes heat, which is why water puts out most ordinary fires.
- Why it matters in arson cases
- Investigators look for the ignition source: matches, a lighter, a delayed device such as a candle, or an electrical fault.
Some texts add a fourth element, the chemical chain reaction, and call it the fire tetrahedron.
Remove any side and the fire goes out
A fire usually develops through four stages: incipient (just started, localised), growth (flames spread, temperature rises), fully developed (everything burning that can burn) and decay (fuel runs out, smouldering).
Causes are classified as accidental (electrical faults, gas leaks, careless smoking), natural (lightning), incendiary (deliberately set, which is arson) or undetermined (not enough evidence to decide).
Arson is the deliberate and malicious setting of fire. Common motives include insurance fraud, revenge, hiding another crime, vandalism, extremism and, rarely, pyromania (a recognised impulse-control disorder).
| Possible indicator | Why it raises suspicion | Innocent alternative to rule out |
|---|---|---|
| Several separate points of origin | Fires don't usually start in two places at once | Fire spreading through hidden gaps; falling burning material |
| Smell of fuel; containers, rags, wicks | Accelerant or ignition device | Fuel stored there normally |
| Pour or trailer patterns on the floor | Liquid poured to spread fire | Fully developed fires can produce floor patterns without accelerant |
| Valuables or pets removed beforehand | Planned fire, e.g. insurance fraud | Coincidence; check with witnesses |
Investigating a fire.
- Make sure the fire is out and the structure is safe.
- Record everything with photographs, video and sketches before disturbing debris. Note doors, windows and what firefighters did.
- Work from the least damaged areas toward the most damaged to find the area of origin. Burn patterns, such as a "V" pattern on a wall, can point back to where a fire started.
- Collect debris from suspected origin areas, plus comparison samples of the same material from unburnt areas, in airtight cans.
- In the laboratory, accelerant residues are concentrated from the air above the debris (headspace or SPME sampling) and analysed by GC–MS.
In India, fire and explosive offences are covered by the Bharatiya Nyaya Sanhita (BNS), 2023, for example mischief by fire or explosive substance. Check the exact section numbers against the official text.
Pause and answer
- Name the three sides of the fire triangle.
- Do pour patterns on the floor prove that an accelerant was used?
